Log Corners

Here's the answer for finishing off the outside corner of your log siding project.
Made from a Kiln Dried Log with a notch cut from the back side which mounts to your outside corner and has flat faces engineered on each side to accept your log siding with a clean butt joint. Just finish off with a bead of caulk to keep out moisture.
Each are just under a 6" Diameter.

Must purchase a minimum of 2 pieces.

Here's the answer for finishing off the outside corner of your log siding project.
Made from a Kiln Dried Log with a notch cut from the back side which mounts to your outside corner and has flat faces engineered on each side to accept your log siding with a clean butt joint. Just finish off with a bead of caulk to keep out moisture.
Each are just under a 8" Diameter.

The perfect partner match for trimming out an inside corner
when using our half log siding! Basically it's a standard square 3 x 3 with one edge rounded over which makes for a clean visible edge that matches up well to your log siding. Finish off with some Sikkens Stain and a bead off caulk.

The perfect partner match for trimming out an inside corner
when using our half log siding! Basically it's a standard square 4 x 4 with one edge rounded over which makes for a clean visible edge that matches up well to your log siding. Finish off with some Sikkens Stain and a bead off caulk.

Here's the answer for finishing off the outside corner of your cedar log siding project.
Made from a Kiln Dried Northern White Cedar Log. Each has a notch cut from the back side which mounts to the outside corner of your building. The flat faces are engineered on each side to accept your quarter log or half log siding with a clean butt joint. Just finish off with a bead of caulk to keep the moisture out.
Each are just under a 6" Diameter and are available in smooth or heand hewn surface.

These Log Corners are great for finishing off the outside corner of your log siding project for a very clean look.
Made from a large Kiln Dried Cedar Log that has a notch cut from the back side which mounts to your outside corner of your house. It's flat faces are engineered on each side to accept your log siding with a clean butt joint. Just finish off with a bead of caulk to keep out moisture.
Each are just under a 8" Diameter and avaialable in hand hewn or smooth surface.

The perfect partner match for trimming out an inside corner
when using our quarter log siding! Basically it's a standard square 3 x 3 with one edge rounded over which makes for a clean visible edge that matches up well to your log siding. Finish off with some Sikkens Stain and a bead off caulk.