6" Cedar Vertical Outside Log Corner ( 10 Foot Hand Hewn )
Here's the answer for finishing off the outside corner of your cedar log siding project.
Made from a Kiln Dried Northern White Cedar Log. Each has a notch cut from the back side which mounts to the outside corner of your building. The flat faces are engineered on each side to accept your quarter log or half log siding with a clean butt joint. Just finish off with a bead of caulk to keep the moisture out.
Each are just under a 6" Diameter and are available in smooth or heand hewn surface.
6" Cedar Vertical Outside Log Corner (8 Foot Smooth ) - Purchase Here
6" Cedar Vertical Outside Log Corner ( 8 Foot Hand Hewn ) - Purchase Here
6" Cedar Vertical Outside Log Corner (10 Foot Smooth ) - Purchase Here
Available in 8 & 10 foot lengths and in Smooth or Hand-Hewn surface.
Must purchase a minimum of 2 pieces.
Cutaway shown with Oly-lag fastener
Now you can also buy 8 cedar vertical outside corner here!!
Color | Natural Cedar |
---|---|
Shipping Details | Shipping
Each order
You must be able to off-load the material in a timely manner and would require that you have adequate/able bodies on-hand (2) to hand unload if a fork lift was not available at your delivery location. The drivers have many other destinations, so your cooperation is very helpful.
Damages? Available in 8 & 10 foot lengths and in Smooth or Hand-Hewn surface.
Now you can also buy 8 cedar vertical outside corner here!! |
Manufacturer | Skylinewoods |