Sikkens-Proluxe Door & Window
Cetol Door & Window is a high performance exterior coating for specialty applications such as entrance doors, garage doors, and windows.
Available in 3 translucent ready mix colors in satin (quart size only) or in clear satin (quart or gallon size).
GLOSS is no longer available.
Usually ships in 1-3 days, quite often same day.
*Note: Ships Fed-Ex ground only
Cetol® Door & Window Wood Finish is a high performance finish for specialty applications such as exterior trim and doors. This alkyd high solids formulation offers optimum protection and a distinctive look for these unique areas. The inclusion of translucent iron oxide pigments and UV absorbers gives excellent UV protection and color retention. Cetol Door & Window Wood Finish creates a protective film while giving the signature distinctive Sikkens Wood Finishes look.
Sikkens Proluxe Cetol Log and Siding is not permitted for use or shipment in...
California the Counties of:
• Placer • Sacramento • Santa Barbara • San Diego • San Joaquin •
• Los Angeles • Orange • Riverside • San Bernardino • Ventura • El Dorado
Utah the Counties of:
For Doors, Windows & Garage Doors
Method - Long haired natural bristle brush. Clears may be sprayed using an airless sprayer with a tip size of .011 - .013.
Surface and Air temperature - 50*-95*F (10*-35*C)
Coverage - Smooth wood - 350-450 sq. ft./gallon
Drying Time - Dust dry after approximately 3 hours at 68*F. Recoatable in 24 hours minimum at 68*F (20*C) and 65%relative humidity. At temperatures below 50*F (10*C), or conditions of high humidity, the drying time will be extended.
LIGHT OAK color has been discontinued by PPG
GLOSS sheen has been discountinued by PPG
Shipping is provided by Fed-Ex Ground for quarts and single gallon purchases. Many times ships the same business day. Most always in 1-3 business days.